Question: How Do You Apply Modge Podge Smoothly?

How do I get a smooth finish with Mod Podge?

For an ultra smooth surface, apply 4 to 5 coats of Mod Podge Hard Coat.

When applying the coats, brush in one direction then the other and let dry between coats.

Wet sand with #400 sandpaper and water.

Sand finish lightly until ridges are flat and smooth..

Why does my Mod Podge look streaky?

Causes of Streaking in Decoupage Finish Applying glue over almost dry glue. This pulls the dry glue away from the surface and creates streaks. In the future, let wet glue dry even if it means skipping an area.

What can I use instead of Mod Podge?

PVA glueIf you just can’t find Mod Podge where you live, look for PVA glue. It’s about the closest you can get. Frequently craft and art stores have PVA glue, but you may have to call around.

Can you clear coat over Modge podge?

All Mod Podge sealers can be used over waterbase and oil base paint, glaze, lacquer and varnish. Clear, waterproof and non-yellowing.

How do you prevent Mod Podge streaks?

2 Answers. When applying the Mod Podge, use a soft, wide brush and as few brush strokes as possible, as it begins to set quickly. If you can brush it on with only one or two strokes, that is best. Use very thin coats.

Why is my Mod Podge not drying clear?

It Isn’t Dry: You may be a bit too impatient. Mod Podge can take a while to dry depending on how thick of a layer you have been applying. If your project looks cloudy, let it sit overnight and check it in the morning. … Apply a layer of sealant between your paint and Mod Podge layers to prevent it!

Can Mod Podge be thinned with water?

ModPodge is used as is. If you are using a white glue, then you thin it with some water. I use it right from the jar. Don’t be afraid to be generous with it.

What is the best brush to use to apply Mod Podge?

Taklon bristle brushMod Podge Topcoats are best brushed onto a project surface using a soft, Taklon bristle brush which will help eliminate brush stroke marks . Clear Chalkboard Topcoat enables you to turn any paper decoupaged surface or any painted surface into a chalkboard surface .

How long does it take for Modge Podge to dry clear?

15-20 minutesAllow Mod Podge to dry at least 15-20 minutes between coats or until the base is clear. If you live in a more humid environment or applied thick coats to your project, this will increase your drying time. You can use a hair dryer to speed up the drying process.

Is Mod Podge hard coat waterproof?

As I said before, no, Mod Podge is not waterproof. … The combination produces a product that is somewhat water resistant, but not waterproof. If a few drops of water end up on your Mod Podge project you can wipe them away with ease.

Can you Mod Podge actual photos?

If you want to go ahead and use photos, just make sure to use a lot of Mod Podge, because it takes more than normal. You’ll have to hold the photos in place for several minutes after you apply the Podge, so that they don’t come up. If you want to make copies or computer printouts of your photos, see the next question.

Can I use clear nail polish instead of Mod Podge?

likely not very well. The nail polish has solvents that will not play well with the other glue, and they will shrink and expand at different rates. These can dry water proof, but don’t have the solvents. …

How do you fix Mod Podge mistakes?

All you need to do is heat up some water as hot as you can get it, and use a sponge to apply it to the fabric or paper on the canvas. Leave it to sit for several minutes as it reactivates the Mod Podge. Peel off as much of the fabric or paper as you can, and then apply more water as needed.

Does Mod Podge really take 4 weeks to cure?

Does Mod Podge really take 4 weeks to cure? Mod Podge takes a very long time to cure; around four weeks, depending on humidity and coat thickness. If you don’t let [the Mod Podge] dry completely between coats, your project can end up more sticky and may bubble a bit.

Why is my Mod Podge white?

You applied the Podge too thickly. This is a common problem I see when readers email me images of Mod Podge that is still white. Usually there’s clumping. Mod Podge is best applied with several thin layers, with dry time in between each layer.

How can I make homemade Modge podge?

To make a jar of fake / homemade Mod Podge you need 1 cup of glue and 1/3 cup of water. These proportions are perfect – don’t mess with them. Other internet recipes for homemade Mod Podge abound but they are TOO WEAK.

Is Homemade Mod Podge as good as store bought?

Homemade Mod Podge is usually made using watered-down glue, so it lacks some of the properties that store-bought Mod Podge has. Store-bought Mod Podge can be used as both an adhesive and sealant, making it durable. The homemade version is less-adhesive, and lacks varnish or sealer.

Can you Mod Podge glossy photos?

The answer is no – not directly. You’ll need to use the “decal method.” In the decal method, you’re going to print out photos on printer paper (not photo paper) and then paint them with Mod Podge photo transfer medium.

Can Mod Podge be used as a sealant?

Mod Podge can be used as a glue to adhere fabric, paper and other porous materials to nearly any surface. It holds tight and dries clear. It can be used as a sealer that protects acrylic paint, decoupage, stain, fabrics and much more.

How many coats of Modge podge should I use?

You can use two or more coats depending on the type of affect you are trying to achieve. If you want a soft smooth surface with no ridges, apply at least 5 to 6 coats.