Question: Which Side Is The Selvage?

Is the selvage edge always straight?

The selvage line is generally always straight.

Sometimes you will see it waver just a bit but it pretty much gives you a straight line.

So, cut off the line of selvage in a straight line….

and you have your straight edge of fabric to work from..

Do you cut patterns on the wrong side of fabric?

Fold the fabric as shown in the instructions, with right sides of the fabric together. Most patterns indicate the right side (the pretty side) using a darker shade than the wrong side. (Occasionally, you may be instructed to cut a fabric on the right side, or to “cut one” meaning to cut on single layer.)

How do you know the grain of fabric?

Lengthwise grain refers to the threads in a fabric which run the length of the fabric, parallel to the selvage of the fabric. Crosswise grain is the threads that run perpendicular to the selvage of the fabric or the cut edge of the fabric as it comes off the bolt.

How do you know the right side of knit fabric?

The little ‘V’ stitches that are visible indicate the “right” side of the fabric. This is the flip side of the above fabric. The straight, horizontal stitches indicate that this is the “wrong” side of the jersey.

Does Aida fabric have a right and wrong side?

Sometimes it’s just an instinct to tell the right side from the wrong side, but they do exist. It is not always immediately obvious especially on plain white Aida, but on certain cross stitch cloths you can tell the difference by looking at the selvage of the fabric.

Should you iron linen?

There really is no need to iron linen garments, unless they have become really crushed. In fact, we love the inherent natural creases and crumples – they are what give linen its drapey, relaxed, soft feel. … White linen is better ironed on both sides, whilst dark linen should be pressed only on the reverse side.

How do you tell the right side of fabric by Selvage?

If you look at the top and bottom finished edge of the fabric (this is called the selvage) you’ll notice tiny holes. (These holes are caused by the pins holding the fabric when it’s created in the textile factories.) If you look at the holes and the holes appear neat and smooth, that’s the right side.

How do you tell the right side of upholstery?

The pattern on upholstery fabric orients perpendicular to the selvages. The right side of drapery fabric often has words printed on the selvage on the right side of the fabric. Upholstery fabric does not, typically, have words printed along the selvage.

Do you cut off selvage when making curtains?

It depends on the fabric as some selvedges are tighter than others. In the grand scheme of things when you are making curtains the time taken to trim off the selvedges is not that much, but unless the selvedges look very tight I do tend to leave them on.

Is the selvage the Grainline?

The line of fabric that moves at a right angle to the crosswise grain is the lengthwise grainline. This thread runs the entire length of the fabric and is parallel to the selvage. … Unless otherwise noted, grain or grainline generally refers to the lengthwise grain.

How do you tell the right side of silk?

Right side is more smooth and shiney while wrong side has slightly rough texture. There is one more way to find out right or wrong side which is the selvedge of the fabric which runs lengthwise.

Is there a right and wrong side to felt?

The felt is non-directional, has no right side or wrong side, and the color is consistent throughout. … Highly saturated colors that are lightfast. Naturally repels soiling and moisture. Since it’s a nonwoven, it can be cut with the edges left raw.

What is wrong side?

1 of handmade paper : the side opposite the wire side.

Is linen shiny?

If the drying is done right, the linen will get smooth and shiny like silk. … Even if the iron often indicates that the highest temperature is for linen, you can turn down the heat a little bit to save the important glue in your fabric. Use a spray bottle with lukewarm water to dampen your fabric before ironing.

What is the wrong side of fabric called?

Right side: When instructions mention the “right side” of fabric, they are talking about the “printed” or “pretty” surface of the fabric. You usually sew things with right sides together so the stitching will be on the inside of the finished project. Wrong side: The other surface is the “wrong” side of the fabric.

How do you tell right from wrong side of linen?

The best way to tell which side the weaver intended as the right side is to look at the selvedge. There are often pinholes in the selvedge. On the right side, the holes are indented slightly. On the wrong side, the holes protrude slightly.

Does linen fabric have a right and wrong side?

Right Side of Linen Fabric If the fabric curls to one side then that is the right side of linen. … Linen is one of those fabrics where you can get away with using either side. So if you cannot tell which is the right or wrong side, pick one and stick with it.

What is the selvage edge?

The selvage is the tightly woven edge on either side of a width of fabric. The selvage doesn’t move or stretch the same as the rest of the fabric so you’ll want to cut them off (or square up) before cutting the rest of the fabric.

What does right side facing mean in sewing?

When you sew two bits of fabric together it’s common to hear the phrase, ‘right sides together’ or ‘right sides facing’. This means that the ‘right sides’ of the fabric will be touching as you sew the seam. Then once its sewn and you turn the fabric over, you don’t see the seam and it looks nice and flat.

Do you fold fabric selvage to selvage?

When your fabric is folded in half lengthwise, selvage to selvage and cut edges matching, there should be no diagonal wrinkles across your fabric. You should also have a lengthwise fold that is straight and lies flat and is not twisted or wrinkled. … Fabric only lays flat when the cut edges are UNEVEN.