Quick Answer: What Thread Should I Use For Stretchy Fabric?

What is a stretch needle for a sewing machine?

Uses: Ballpoint needle for heavier, looser sweater knits; stretch needle for highly elastic fabrics, like.

Spandex, or Lycra.

Configuration: Both have rounded points that penetrate between fabric threads rather than pierce them.

(Stretch-needle point is slightly less rounded than ballpoint.).

What thread is used for nylon?

An all purpose polyester or nylon thread is great. Some people like to match the thread the the fabric. That is, when using lightweight nylon fabric, use a lightweight nylon thread. However, all purpose thread will work okay as well.

What kind of thread do you use for stretch fabric?

polyester threadIf you’re sewing in a regular domestic machine, choose a polyester thread designed for clothing construction. We recommend this 40wt thread called Designer™. Not only is it strong, but it carries a small amount of stretch, making it ideal for stretchy fabrics and garment construction.

How do you sew stretchy fabric?

The best stitches to use for sewing stretch fabrics are:Narrow zigzag: opt for a very narrow setting with the zigzag, with the stitch length equal to the stitch width.Overedge stitch: a specialty stitch that locks over the edge of the fabric so it stitches and finishes a seam in one pass.More items…

Can you use straight stitch on stretch fabric?

When sewing knits with a straight stitch, stretch the fabric slightly (and gently) as it goes under the presser foot. To do this, apply equal pressure on both sides of the needle by slightly pulling the fabric.

Is it better to sew with cotton or polyester thread?

Cotton fabric should be sewn with cotton thread; polyester or manmade fiber should be sewn with polyester thread. … Polyester fiber is stronger than most natural thread, so over time, the stronger polyester thread can break the weaker cotton fiber of the fabric.

What does a stretch stitch look like on a sewing machine?

It looks like a lightning bolt, and it works kind of like a zig-zag, except the needle goes back a little bit to overlap the previous stitch. This means that the stretch stitch can look more like a straight line while being just as stretchy as a zig-zag stitch.

How do you use stretchy threads?

I use stretch thread for both the top and bottom threads; for the bobbin, I wind it just as you would regular thread. if you have a machine that doesn’t work with the large cone of thread that stretch thread comes on (like me), just place the cone on the table behind your machine and thread as usual.

How do you sew stretchy threads?

To sew with elastic thread, you must hand-wind the bobbin. Do this without stretching the elastic thread. Wind the elastic thread on the bobbin until the bobbin is full. Thread the top of the sewing machine with your regular sewing thread.

What is stretchy thread called?

Third, sometimes it works wonders to use your regular thread on top and to hand-wind the bobbin with a special stretchy thread called “Wooly Nylon,” which is available in most fabric stores these days: http://www.threadart.com/shop/category.asp?

What kind of thread do you use for spandex?

polyester threadThread. As mentioned above, polyester thread is a good general pick for sewing spandex. If using a serger or cover stitch machine, you may also want to consider wooly nylon thread, especially for the loopers.

What thread do you use for leggings?

The exception to the rule is 100% cotton. That will break. It’s mainly meant for quilting. A good rule of thumb is to use an all purpose poly/cotton blend because synthetic threads always have a stretch to it.

How do you sew stretchy fabric without puckering?

Use tissue Place a tissue on the fabric that you are sewing so that the needle hits the tissue before it gets to the fabric. Tug gently on the fabric as you sew. In the end, cut the sewing threads. This is an effective method to prevent puckering on stretchy fabric.