Which Side Of Fabric Is Selvage?

Do you cut off selvage when making curtains?

It depends on the fabric as some selvedges are tighter than others.

In the grand scheme of things when you are making curtains the time taken to trim off the selvedges is not that much, but unless the selvedges look very tight I do tend to leave them on..

What part of the fabric is the selvage?

The selvage is the tightly woven edge on either side of a width of fabric. The selvage doesn’t move or stretch the same as the rest of the fabric so you’ll want to cut them off (or square up) before cutting the rest of the fabric.

Do you cut patterns on the wrong side of fabric?

Fold the fabric as shown in the instructions, with right sides of the fabric together. Most patterns indicate the right side (the pretty side) using a darker shade than the wrong side. (Occasionally, you may be instructed to cut a fabric on the right side, or to “cut one” meaning to cut on single layer.)

What is the edge of fabric called?

A selvage (US English) or selvedge (British English) is a “self-finished” edge of a piece of fabric which keeps it from unraveling and fraying. The term “self-finished” means that the edge does not require additional finishing work, such as hem or bias tape, to prevent fraying.

Which side of fleece is the right side?

On standard fleece the right side is nubbly and the wrong side is smooth. When the pattern instructions say, “Place the two pieces right sides together,” it means place them nubbly sides together. Fleece marked “anti-pill” looks this way, too, and tends to be ultra-soft and cuddly. Some fleece is smooth on both sides.

What does right side facing mean in sewing?

When you sew two bits of fabric together it’s common to hear the phrase, ‘right sides together’ or ‘right sides facing’. This means that the ‘right sides’ of the fabric will be touching as you sew the seam. Then once its sewn and you turn the fabric over, you don’t see the seam and it looks nice and flat.

Do you cut out the darts on a pattern?

Start by cutting out your pattern in the required fabric (in the suitable size). Work by pinning the fabric RIGHT sides together and position the pattern onto the fabric, checking the grainline. Cut out the fabric. You will need to mark the darts onto the fabric, so that you know where to sew them.

Does linen fabric have a right and wrong side?

Right Side of Linen Fabric If the fabric curls to one side then that is the right side of linen. … Linen is one of those fabrics where you can get away with using either side. So if you cannot tell which is the right or wrong side, pick one and stick with it.

Does Aida fabric have a right and wrong side?

Sometimes it’s just an instinct to tell the right side from the wrong side, but they do exist. It is not always immediately obvious especially on plain white Aida, but on certain cross stitch cloths you can tell the difference by looking at the selvage of the fabric.

How do you cut a pattern out of fabric?

Before you can cut your fabric pieces out – pin your pattern pieces to the fabric – I like to insert the pins perpendicular to the seams to stop the pattern from skewing. To cut the pattern pieces out, use sewing scissors and hold them flat along the table to get nice long, smooth cuts.

How do you knit a selvage edge?

My favorite slip stitch selvedge, for edges that will be visible, and not sewn, is this one. On every row: Slip the first stitch purlwise, work to the last stitch, knit the last stitch. This forms an attractive chain up the edge of your knitting, and works best when used with a non-curling border, like garter stitch.

What is the right side of fabric?

Definitions: Right side: When instructions mention the “right side” of fabric, they are talking about the “printed” or “pretty” surface of the fabric. You usually sew things with right sides together so the stitching will be on the inside of the finished project.

Is there a wrong side to linen?

The best way to tell which side the weaver intended as the right side is to look at the selvedge. There are often pinholes in the selvedge. On the right side, the holes are indented slightly. On the wrong side, the holes protrude slightly.

Is Linen hard to sew?

Actually, linen is easy to sew; it does not slip or stretch when you are cutting it out or sewing a seam. However, linen is prone to shrinking and to fraying, so special care must be taken when preparing it for layout and when finishing seams. Versatile natural linen comes in weights suitable for any project.

Do you fold fabric selvage to selvage?

When your fabric is folded in half lengthwise, selvage to selvage and cut edges matching, there should be no diagonal wrinkles across your fabric. You should also have a lengthwise fold that is straight and lies flat and is not twisted or wrinkled. … Fabric only lays flat when the cut edges are UNEVEN.

Which way do you cut fabric?

The majority of garments are cut on the warp because the fabric does not stretch in this direction which ensures that the hang of the garment is correct. In fact, if you pull two points close to each other along the warp threads you will see that the fabric does not stretch and it stays rigid.

How do you know the right side of knit fabric?

The little ‘V’ stitches that are visible indicate the “right” side of the fabric. This is the flip side of the above fabric. The straight, horizontal stitches indicate that this is the “wrong” side of the jersey.

How do you tell the right side of selvage on fabric?

If you look at the top and bottom finished edge of the fabric (this is called the selvage) you’ll notice tiny holes. (These holes are caused by the pins holding the fabric when it’s created in the textile factories.) If you look at the holes and the holes appear neat and smooth, that’s the right side.

Is the selvage edge always straight?

The selvage line is generally always straight. Sometimes you will see it waver just a bit but it pretty much gives you a straight line. So, cut off the line of selvage in a straight line…. and you have your straight edge of fabric to work from.

What does pattern printed side down mean?

A shaded or dotted pattern piece tells you that the pattern piece needs to be flip and placed with the printed side down on the fabric. … Finally, if you see a pattern piece that is placed halfway on and halfway off the fabric, this just means that with the fabric folded there is simply not enough fabric to cut it out.

How can you tell if a fabric is biased?

So if you have a piece of fabric laying down flat, and your selvage is along the bottom…….. Then you can fold edge of the fabric on the left, down to the selvage edge, creating a diagonal fold. If you cut right along that diagonal fold, you are cutting on the bias……or a 45 degree angle to the selvage.